Overview
Description
Our integrated circuits and reference designs help you create next-generation cooker hood systems with powerful suction capability and low audible noise. Our quiet motor drives, accurate sensing technologies, high-efficiency power supply and secure connectivity solutions make your cooker hood smart and quiet.
Design requirements
Modern cooker hood systems often require:
Ultra efficient motor control with enhanced protection for silent operation and powerful suction.
Robust and durable user interface technologies for touch button and displays.
Accurate and robust environment sensing for automatic and easy to clean ventilation.
Secure and reliable wireless/mobile connectivity.
Highly efficient, reliable and low EMI power supply and PFC solutions with low standby.
Non-isolated AC/DC power supply
Cost effective and highly efficient small form factor AC/DC solutions for power factor correction and bias power supply generation with excellent EMI performance.
Products
Power factor correction (PFC) controllers
UCC28180—18-kHz-250-kHz CCM PFC controller with enhanced startup & transient response
Shunt voltage references
ATL431LI—Low-IQ programmable shunt regulator offered in an ultra-small DQN package
TL431—Adjustable precision shunt regulator
LMV431A—1%, low-voltage (1.24-V) adjustable precision shunt regulator
LM4040—Fixed voltage, 45-µA, precision micropower shunt voltage reference
LM4041A12—1.2-V precision micropower shunt voltage reference with 0.1% accuracy
Isolated DC/DC converters & modules
DCP010505B—Miniature, 1W Isolated Unregulated DC/DC Converters
DCR010505—Miniature, 1W Isolated Regulated DC/DC Converters
DCH010515D—Miniature, 1W, 3kVDC Isolated DC/DC Converters
DCH010515S—Miniature, 1W, 3kVDC Isolated DC/DC Converters
SR & load share controllers
UCC24650—200-V wake-up monitor for fast transient primary-side regulation
Isolated AC/DC power supply
Offline switch mode power supply solutions with multiple output rails (isolated & non-isolated) optimized for cost, efficiency, space and low EMI.
Products
Flyback controllers
UCC28740—Constant-Voltage, Constant-Current (CVCC) Flyback controller with Secondary Side Regulation (SSR)
UCC28610—12-65W green-mode Flyback power supply controller
UCC28700—Constant-voltage, constant-current PWM with PSR & Programmable cable compensation
UCC28910—700V Flyback switcher with constant-voltage constant-current and primary-side control
Shunt voltage references
ATL431LI—Low-IQ programmable shunt regulator offered in an ultra-small DQN package
TL431—Adjustable precision shunt regulator
LMV431A—1%, low-voltage (1.24-V) adjustable precision shunt regulator
Isolated DC/DC converters & modules
DCP010505B—Miniature, 1W Isolated Unregulated DC/DC Converters
DCR010505—Miniature, 1W Isolated Regulated DC/DC Converters
DCH010515S—Miniature, 1W, 3kVDC Isolated DC/DC Converters
Power protection & gating
Highly integrated, small size and fully protected solutions provide full safety for different low power voltage rails. Power gating solutions for lowest standby power.
Products
USB power switches & charging port controllers
TPS2051B—0.5A loading, 2.7-5.5V, 70mΩ USB power switch, active-high
Load switches
TPS22960—2-ch, 5.5-V, 0.5-A, 435-mΩ load switch with output discharge
TPS22944—5.5-V, 0.1-A, 500-mΩ, load switch with current limit and active high enable
TPS22968—2-ch, 5.5-V, 4-A, 25-mΩ load switch with adj. rise time and output discharge
TPS22918—5.5-V, 2-A, 52-mΩ load switch with adj. rise time and adj. output discharge
TPS22917—5.5-V, 2-A, 80-mΩ , 10-nA leakage load switch adj. rise time and adj output discharge
eFuses & hot swap controllers
TPS25921L—4.5-V to 18-V, 90mΩ, 0.4-1.6A eFuse with latch off fault response
TPS2596—2.7-V to 19-V, 85mΩ, 0.13-2A eFuse with selectable over voltage protection clamp in leaded package
MSP430 microcontrollers
MSP430F5529—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
MSP430F5528—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
MSP430G2231—16 MHz MCU with 2KB Flash, 128B SRAM, 10-bit ADC, SPI/I2C, timer
MSP430G2553—16 MHz MCU with 16KB Flash, 512B SRAM, comparator, UART/SPI/I2C, timer
Noninverting buffers & drivers
SN74LVC1G17—Single 1.65-V to 5.5-V buffer with Schmitt-Trigger inputs
SN74LVC1G07—Single 1.65-V to 5.5-V buffer with open-drain outputs
SN74LVC1G125—Single 1.65-V to 5.5-V buffer with 3-state outputs
SN74LVC2G241—2-ch, 1.65-V to 5.5-V buffers with 3-state outputs
Non-isolated DC/DC power supply
Cost effective, small form factor DC/DC solutions with excellent EMI performance and high efficiency.
Products
Buck converters (integrated switch)
TPS62932—3.8-V to 30-V input, 2-A, 200-kHz to 2.2-MHz, low-IQ synchronous buck converter in SOT-583 package
TPS563231—4.5-V to 17-V input, 3-A synchronous step-down voltage regulator
LMR50410—SIMPLE SWITCHER 4-V to 36-V, 1-A synchronous step-down converter
TPS562203—4.2-V to 17-V input, 2-A synchronous buck converter in SOT563 with eco-mode
Linear & low-dropout (LDO) regulators
TLV740P—300-mA low-dropout (LDO) regulator with foldback current limit
TLV741P—150-mA low-dropout (LDO) voltage regulator with active output discharge and enable
TPS7A43—50-mA, 85-V, ultra-low IQ, dual low-dropout voltage regulator with power good and precision enable
LP2985—150-mA, 16-V, low-dropout voltage regulator with enable
Boost converters (integrated switch)
TPS61220—0.7-VIN, adjustable output voltage boost converter with 5.5-μA quiescent current
Sequencers
LM3881—3 rail simple power sequencer with adjustable time delay
N-channel MOSFETs
CSD17318Q2—30-V, N channel NexFET™ power MOSFET, single SON 2 mm x 2 mm, 16.9 mOhm
CSD88539ND—60-V, N channel NexFET™ power MOSFET, dual SO-8, 28 mOhm
CSD88537ND—60-V, N channel NexFET™ power MOSFET, dual SO-8, 15 mOhm
Multi-channel ICs (PMICs)
DLPA1000—PMIC/LED Driver for DLP2000 (0.2 nHD) DMD
Sensors
Innovative solutions for a wide range of sensor types applicable to cooker hoods. Optimized for cost, performance and reliability.
Products
Analog temperature sensors
LM20—±1.5°C Analog Output Temperature Sensor
LMT87—±2°C 2.7V to 5.5V analog output temperature sensor with -13.6 mV/°C gain
LMT84—1.5V-Capable, 10 uA Analog Output Temperature Sensor in SC70 and TO-92
Temperature switches
TMP302—Pin-Selectable Trip Point 1.4V-Capable Family of Temperature Switches
Digital temperature sensors
TMP103—±2°C Digital temperature sensor with I2C/SMBus capable of 1.4V in WCSP
LMT01—0.5°C Accurate 2-pin Temperature Sensor with a Pulse Train Interface
Hall-effect latches & switches
DRV5013—High voltage (up to 38-V), high bandwidth (30-kHz) Hall effect latch
DRV5023—High voltage (up to 38V), high bandwidth (up to 30 kHz) unipolar switch
Linear Hall-effect sensors
DRV5053—High voltage (up to 38V), linear hall effect sensor
Inductive sensor AFEs
LDC1614—4-Ch, 28-bit, high-resolution Inductance to digital converter
Humidity sensors
HDC3022—0.5% RH digital humidity sensor with permanent IP67 filter
Proximity sensors
OPT3101—ToF-based long-range proximity and distance sensor analog front end (AFE)
Industrial mmWave radar sensors
IWR6843—Single-chip 60-GHz to 64-GHz intelligent mmWave sensor integrating processing capability
Analog front end
Signal conditioning solutions for a wide range of sensor types with scalable analog and digital output options.
Products
General-purpose op amps
LM2904B—Dual, 36-V, 1.2-MHz operational amplifier with -40°C to 125°C operation
LM358B—Dual, 36-V, 1.2-MHz, 3-mV offset voltage operational amplifier with -40°C to 85°C operation
TLV9062—Dual, 5.5-V, 10-MHz operational amplifier
TLV9151—Single, 16-V, 4.5-MHz, low-power operational amplifier
Difference amplifiers
INA132—Low Power, Single-Supply Difference Amplifier
Comparators
LM393A—Precision dual differential comparator, industrial grade
TLV1861—Single nanopower high-voltage comparator with open-drain output
LM397—Single General Purpose Voltage Comparator
TLV7011—Low power, small size comparator with push-pull output
Precision op amps (Vos<1mV)
LMP7716—Dual precision, 17-MHz, low-noise, low bias current, CMOS input amplifier
OPA376—Precision (0.025mV), low noise (7.5nV/rtHz), low quiescent current (760uA) op amp
OPA2376—Dual, precision, low-noise, low quiescent current operational amplifier
High-speed op amps (GBW ≥ 50 MHz)
OPA365—2.2V, 50MHz, Low-Noise, Single-Supply Rail-to-Rail Operational Amplifier
OPA835—Ultra Low Power, Rail to Rail Out, Negative Rail In, VFB Amplifier
Precision ADCs
ADS8320—16-Bit, High-Speed, 2.7V-to-5V Micropower Sampling Analog-to-Digital Converter (ADC)
Series voltage references
REF35—650-nA quiescent current, 12-ppm/°C drift, ultra-low-power precision voltage reference
REF70—Ultra-high-precision voltage reference with low noise and low drift
REF2025—8-ppm/°C drift, low-power, dual-output Vref & Vref/2 voltage reference
REF20-Q1—Automotive low-drift, low-power, series voltage reference
Analog switches & muxes
TS3A5017—3.3-V, 4:1, 2-channel general-purpose analog multiplexer
Inductive sensor AFEs
LDC1614—4-Ch, 28-bit, high-resolution Inductance to digital converter
System controller
MCUs with advanced capabilities in secure wired and wireless connectivity, robust touch key solutions, power and stand-by management, as well as high performance processors with multimedia options from simple displays to advanced HMIs.
Products
MSP430 microcontrollers
MSP430F5529—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
MSP430F5528—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
C2000 real-time microcontrollers
TMS320F28027F—C2000™ 32-bit MCU with 60 MHz, 64 KB flash, InstaSPIN-FOC
TMS320F28027F-Q1—Automotive C2000™ 32-bit MCU with 60 MHz, 64 KB flash, InstaSPIN-FOC
Inductive sensor AFEs
LDC1614—4-Ch, 28-bit, high-resolution Inductance to digital converter
Actuators
These highly reliable solutions are optimized for cost, size and pin-count. They drive single or multiple loads such as relays, steam valves or any kind of actuators with options for isolation and advanced protection.
Products
Low-side switches
ULN2003A—50-V, 7-ch darlington transistor array, -20C to 70C
Isolated DC/DC converters & modules
DCP010505B—Miniature, 1W Isolated Unregulated DC/DC Converters
DCR010505—Miniature, 1W Isolated Regulated DC/DC Converters
DCH010515S—Miniature, 1W, 3kVDC Isolated DC/DC Converters
Series voltage references
REF35—650-nA quiescent current, 12-ppm/°C drift, ultra-low-power precision voltage reference
REF70—Ultra-high-precision voltage reference with low noise and low drift
REF2025—8-ppm/°C drift, low-power, dual-output Vref & Vref/2 voltage reference
N-channel MOSFETs
CSD17318Q2—30-V, N channel NexFET™ power MOSFET, single SON 2 mm x 2 mm, 16.9 mOhm
CSD88537ND—60-V, N channel NexFET™ power MOSFET, dual SO-8, 15 mOhm
Power blocks
CSD87353Q5D—30-V, N channel synchronous buck NexFET™ power MOSFET, SON 5 mm x 6 mm power block, 40 A
Half-bridge drivers
TPS51604—4-A, 28-V half bridge gate driver for synchronous buck high frequency CPU core power applications
UCC27714—4-A, 600-V half bridge gate driver
Precision op amps (Vos<1mV)
LMP7716—Dual precision, 17-MHz, low-noise, low bias current, CMOS input amplifier
OPA376—Precision (0.025mV), low noise (7.5nV/rtHz), low quiescent current (760uA) op amp
OPA2376—Dual, precision, low-noise, low quiescent current operational amplifier
OPA2320—Dual, precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS operational amplifier
High-speed op amps (GBW ≥ 50 MHz)
OPA365—2.2V, 50MHz, Low-Noise, Single-Supply Rail-to-Rail Operational Amplifier
OPA835—Ultra Low Power, Rail to Rail Out, Negative Rail In, VFB Amplifier
General-purpose op amps
LM2904B—Dual, 36-V, 1.2-MHz operational amplifier with -40°C to 125°C operation
LM358B—Dual, 36-V, 1.2-MHz, 3-mV offset voltage operational amplifier with -40°C to 85°C operation
TLV9062—Dual, 5.5-V, 10-MHz operational amplifier
TLV9151—Single, 16-V, 4.5-MHz, low-power operational amplifier
Comparators
LM393A—Precision dual differential comparator, industrial grade
TLV1861—Single nanopower high-voltage comparator with open-drain output
LM397—Single General Purpose Voltage Comparator
Solenoid drivers
DRV110—Single-Channel Relay, Solenoid, Valve Low-Side Controller With Current Regulation
Motor & power controller
MCUs have advanced capabilities for high efficiency motor control and power management.
Products
Arm Cortex-M0+ MCUs
MSPM0G1106—80MHz Arm M0+ MCU, 64KB Flash, 32KB SRAM, 2×12bit 4Msps ADC, op-amp
MSPM0G1507— 80MHz Arm M0+ MCU, 128KB Flash, 32KB SRAM, 2×12bit 4Msps ADC, DAC, 3×COMP, 3×op-amp, MATHACL
MSP430 microcontrollers
MSP430F5528—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
MSP430F5529—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
MSP430G2231—16 MHz MCU with 2KB Flash, 128B SRAM, 10-bit ADC, SPI/I2C, timer
C2000 real-time microcontrollers
TMS320F28027F—C2000™ 32-bit MCU with 60 MHz, 64 KB flash, InstaSPIN-FOC
TMS320F28027F-Q1—Automotive C2000™ 32-bit MCU with 60 MHz, 64 KB flash, InstaSPIN-FOC
Monitoring
Cost and board space effective solutions ensure proper operation and reliably detect any fault conditions.
Products
Analog temperature sensors
LM20—±1.5°C Analog Output Temperature Sensor
LMT84—1.5V-Capable, 10 uA Analog Output Temperature Sensor in SC70 and TO-92
LMT87—±2°C 2.7V to 5.5V analog output temperature sensor with -13.6 mV/°C gain
Digital temperature sensors
TMP103—±2°C Digital temperature sensor with I2C/SMBus capable of 1.4V in WCSP
LMT01—0.5°C Accurate 2-pin Temperature Sensor with a Pulse Train Interface
Humidity sensors
HDC3022—0.5% RH digital humidity sensor with permanent IP67 filter
Supervisor & reset ICs
TLV809—3-pin voltage supervisor (reset IC) with active-low, push-pull reset
TLV803—3-pin voltage supervisor (reset IC) with active-low & open-drain reset
TPS3895—Single-channel, ultra-small, adjustable supervisor with active-high, push-pull output
TPS3897—Single-channel, ultra-small, adjustable supervisor with active-high, open-drain output
Output user interface
Appealing cost effective solutions for LED driving with multiple output interfaces and displays
Products
RGB LED drivers
LP5864—4 × 18 LED matrix driver with 8-bit analog and 8-/16-bit PWM dimming
LP5018—18-channel I2C constant-current RGB LED driver
TLC59116—16-bit Fast-Mode Plus (FM+) I2C-Bus constant-current LED sink driver
TLC59283—16 channel constant current LED driver with pre-charge FET
LCD & OLED display power & drivers
TPS65130—Split-Rail Converter with Dual, Positive and Negative Outputs (300mA typ)
Speaker amps
TPA6211A1—3.1-W, mono, analog input Class-AB audio amplifier
Speaker amps
TPA6211A1—3.1-W, mono, analog input Class-AB audio amplifier
≤ 0.47-in array pico products
DLPC2607—DLP® display controller for DLP2000 (0.2 nHD) DMD
DLPA2005—DLP® PMIC/LED driver for DLP2010 and DLP2010NIR (0.2 WVGA) DMDs
DLP230NP—0.23-inch 1080p DLP® digital micromirror device (DMD)
Input user interface
Easy to implement touch key, switch and slider solutions with low power consumption and high resistance to moisture and EMI (especially conducted noise).
Products
Audio CODECs
TLV320AIC3254—Very Low-Power Stereo Audio CODEC with programmable miniDSP
MSP430 microcontrollers
MSP430F5528—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
MSP430F5529—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
MSP430G2231—16 MHz MCU with 2KB Flash, 128B SRAM, 10-bit ADC, SPI/I2C, timer
MSP430G2553—16 MHz MCU with 16KB Flash, 512B SRAM, comparator, UART/SPI/I2C, timer
Haptic motor drivers
DRV2605—Haptic driver for ERM/LRA with waveform library & auto-resonance tracking
DRV2605L—Haptic driver for ERM/LRA with 2-V operation, waveform library & auto-resonance tracking
I2C general-purpose I/Os (GPIOs)
TCA9534A—8-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, & config registers
Inductive sensor AFEs
LDC1614—4-Ch, 28-bit, high-resolution Inductance to digital converter
LDC3114-Q1—Automotive 4-channel inductance-to-digital converter for low-power proximity & touch-button sensing
Wireless interface
Robust, power efficient and highly secure solutions and certified modules enable the rapid and easy addition of Wi-Fi and/or BLE connectivity to the Internet of Things (IoT), enabling extended field studies, asset tracking, configuration and interfacing.
Products
Other wireless products
CC2511—2.4 GHz Radio Transceiver, 8051 MCU, 16KB or 32KB Flash memory and full-speed USB interface
CC2530-RF4CE—Zigbee, IEEE 802.15.4 and RF4CE wireless MCU with 256kB Flash and 8kB RAM
Low-power 2.4-GHz products
CC2651R3—SimpleLink™ 32-bit Arm® Cortex®-M4 single-protocol 2.4-GHz wireless MCU with 352-kB flash
CC2640—SimpleLink™ 32-bit Arm Cortex-M3 Bluetooth® Low Energy wireless MCU with 128kB Flash
CC2650MODA—SimpleLink™ 32-bit Arm Cortex-M3 multiprotocol 2.4 GHz wireless module with 128kB Flash
Sub-1 GHz transceivers
CC1190—850 - 950MHz RF front end
CC1120—High performance Sub-1 GHz wireless transceiver for narrowband systems
Wi-Fi products
CC3200—SimpleLink™ 32-bit Arm Cortex-M4 Wi-Fi® wireless MCU with 2 TLS/SSL and 256kB RAM
CC3200MOD—SimpleLink™ 32-bit Arm Cortex-M4 Wi-Fi® and Internet-of-Things wireless module
WL1837MOD—WiLink™ 8 industrial dual band, 2x2 MIMO Wi-Fi®, Bluetooth® & Bluetooth Smart module
Signal input/output protection
Provides protected and reliable communication between the MCU and multiple sensors.
Products
ESD protection diodes
TPD2E001—Dual 1.5-pF, 5.5-V, ±8-kV ESD protection diode with 1-nA max leakage & VCC pin for USB 2.0
TPD3E001—3 channel 1.5-pF, 5.5-V, ±8kV ESD protection diode with 1-nA max leakage & VCC pin for USB 2.0
TPD4E004—Quad 1.6-pF, 5.5-V, ±8-kV ESD protection diode with VCC pin for High Speed Interfaces
TVS diodes
TVS3300—33V flat-clamp surge protection device
TVS0500—5V flat-clamp surge protection device
TVS1400—14V flat-clamp surge protection device
Previous: Electric power steering (EPS)
Next: Cooking top