Overview
Description
Related applications
Our integrated circuits and reference designs help you create sophisticated cordless handheld garden tools with high torque capability, maximum efficiency and battery operating time with enhanced protection.
Design requirements
Optimal cordless handheld garden tools often require:
Compact and high-efficient motor drives that meet thermal requirements.
High peak current capability with reliable protection and safety features.
Innovative user-interface solutions and accurate sensing solutions.
Secure, robust and reliable wireless connectivity.
Input power protection
Reliable protection against surge or transient voltage.
Products
ESD protection diodes
ESD351—1.8-pF, 3.3V, ±30-kV ESD protection diode with 6.5-V, 16-A TLP clamping in 0402 package for USB 2.0
TPD2E001—Dual 1.5-pF, 5.5-V, ±8-kV ESD protection diode with 1-nA max leakage & VCC pin for USB 2.0
TPD4E004—Quad 1.6-pF, 5.5-V, ±8-kV ESD protection diode with VCC pin for High Speed Interfaces
TPD2E007—Dual 10-pF, ±13-V, ±8-kV ESD protection diode for AC Signal Data Interfaces
TVS diodes
TVS3300—33V flat-clamp surge protection device
TVS0500—5V flat-clamp surge protection device
TVS1400—14V flat-clamp surge protection device
Battery protection
Reliable and robust protection switches ensure correct charging and discharging, thereby, enabling battery protection from over current short circuit conditions.
Products
eFuses & hot swap controllers
TPS2490—9-V to 80-V hot swap controller with power limiting and latch off
TPS25921L—4.5-V to 18-V, 90mΩ, 0.4-1.6A eFuse with latch off fault response
TPS2596—2.7-V to 19-V, 85mΩ, 0.13-2A eFuse with selectable over voltage protection clamp in leaded package
Battery protectors
BQ7718—Family 2-5S Overvoltage Protector with Internal Delay Timer
BQ76200—High-side n-channel FET driver
N-channel MOSFETs
CSD17576Q5B—30-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 2.9 mOhm
CSD18532Q5B—60-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 3.2 mOhm
CSD18512Q5B—40-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 1.6 mOhm
CSD13381F4—12-V, N channel NexFET™ power MOSFET, single LGA 1 mm x 0.6mm, 180 mOhm, gate ESD protection
P-channel MOSFETs
CSD23381F4—-12-V, P channel NexFET™ power MOSFET, single LGA 0.6 mm x 1 mm, 175 mOhm, gate ESD protection
Non-isolated DC/DC power supply
Cost effective, high efficiency, small form factor DC/DC solutions with excellent EMI performance.
Products
Buck converters (integrated switch)
LMR51606—SIMPLE SWITCHER® power converter with 4.5V-to-65V 0.6A synchronous buck and 25µA quiescent current
LMR51610—SIMPLE SWITCHER® power converter with 4.5V-to-65V 1A synchronous buck and 25µA quiescent current
LMR36520—SIMPLE SWITCHER® 4.2-V to 65-V, 2-A synchronous step-down converter with 26-uA IQ
LM5163—100-V input, 0.5-A synchronous buck DC/DC converter with ultra-low IQ
Buck controllers (external switch)
LM5146—100-V synchronous buck DC/DC controller with wide duty-cycle range
Linear & low-dropout (LDO) regulators
TLV755P—500-mA high-PSRR low-IQ low-dropout voltage regulator with enable
TPS7A43—50-mA, 85-V, ultra-low IQ, dual low-dropout voltage regulator with power good and precision enable
TLV741P—150-mA low-dropout (LDO) voltage regulator with active output discharge and enable
TPS709—150-mA, 30-V, ultra-low-IQ, low-dropout voltage regulator with reverse current protection and enable
Boost converters (integrated switch)
TLV61046A—28-V Output Voltage Boost Converter with Power Diode and Isolation Switch
TPS61299—95-nA low IQ 5.5-V boost converter with input current limit and fast transient performance
TPS61222—0.7-VIN, 5-V fixed output voltage boost converter with 5.5-μA quiescent current
TPS61376—25-V, 4.5-A, boost converter with 2.5% accuracy input average current limit & true disconnection
Sensors
Innovative solutions for a wide range of sensor types that are also applicable to cordless tools including displacement, position, speed, acceleration, force and proximity sensing. Optimized for cost, performance and reliability.
Products
Inductive sensor AFEs
LDC1612—2-Ch, 28-bit, high-resolution Inductance to digital converter
LDC1312—2-Ch, 12-bit, general purpose inductance to digital converter
LDC1614—4-Ch, 28-bit, high-resolution Inductance to digital converter
LDC1314—4-Ch, 12-bit, general purpose inductance to digital converter
Analog temperature sensors
LMT84—1.5V-Capable, 10 uA Analog Output Temperature Sensor in SC70 and TO-92
LMT87—±2°C 2.7V to 5.5V analog output temperature sensor with -13.6 mV/°C gain
LMT86—2.2V-Capable, 10 uA Analog Output Temperature Sensor in SC70 and TO-92
LMT87-Q1—Automotive ±2.7°C 2.7V to 5.5V analog output temperature sensor with -13.6 mV/°C gain
Temperature switches
TMP302-Q1—Automotive, Pin-Selectable Trip Point 1.4V-Capable Family of Temperature Switches
Hall-effect latches & switches
TMAG5115—High-speed Hall-effect latch with low jitter (fast response)
DRV5013—High voltage (up to 38-V), high bandwidth (30-kHz) Hall effect latch
Digital temperature sensors
LMT01—0.5°C Accurate 2-pin Temperature Sensor with a Pulse Train Interface
Analog front end
The analog front end provides signal conditioning for a wide range of sensor types applicable to cordless tools. Choose between scalable analog and digital output solutions.
Products
Precision ADCs
ADS8320—16-Bit, High-Speed, 2.7V-to-5V Micropower Sampling Analog-to-Digital Converter (ADC)
ADS124S08—24-bit, 4-kSPS, 12-ch delta-sigma ADC with PGA and voltage reference for sensor measurement
Series voltage references
REF35—650-nA quiescent current, 12-ppm/°C drift, ultra-low-power precision voltage reference
REF70—Ultra-high-precision voltage reference with low noise and low drift
REF2025—8-ppm/°C drift, low-power, dual-output Vref & Vref/2 voltage reference
REF20-Q1—Automotive low-drift, low-power, series voltage reference
Analog switches & muxes
TS5A3159A—1-Ω, 5-V, 2:1 (SPDT), 1-channel general-purpose analog switch with powered-off protection
TS5A21366—0.75-Ω on-state resistance, 5-V, 1:1 (SPST), two-channel analog switch with 1.8-V input logic
TPS3702—High-accuracy window voltage detector for overvoltage and undervoltage monitoring
Power stage
Highly reliable, discrete and integrated solutions optimized for cost, size and pin count to drive any kind of motors. Well-protected and power-efficient for high and low voltages.
Products
Brushed DC (BDC) motor drivers
DRV8701—47-V H-bridge smart gate driver
BLDC drivers
DRV8300—100-V max simple 3-phase gate driver with bootstrap diodes
DRV8350R—102-V max 3-phase smart gate driver with buck regulator
Input user interface
Highly robust and reliable solutions for trigger switches, speed dials, buttons and sliders, and touch and proximity detection. This contactless user interface is power efficient and highly resistant to moisture and EMI (especially conducted noise).
Products
MSP430 microcontrollers
MSP430FR4131—16 MHz MCU with 4KB FRAM, 0.5KB SRAM, 10-bit ADC, LCD, UART/SPI/I2C, IR logic, timer
MSP430F5528—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
MSP430G2553—16 MHz MCU with 16KB Flash, 512B SRAM, comparator, UART/SPI/I2C, timer
MSP430F5172—25 MHz MCU with 32KB Flash, 2KB SRAM, 10-bit ADC, comparator, DMA, 16-bit High Resolution timer
Inductive sensor AFEs
LDC1612—2-Ch, 28-bit, high-resolution Inductance to digital converter
LDC1314—4-Ch, 12-bit, general purpose inductance to digital converter
LDC1312—2-Ch, 12-bit, general purpose inductance to digital converter
LDC1614—4-Ch, 28-bit, high-resolution Inductance to digital converter
Hall-effect latches & switches
TMAG5115—High-speed Hall-effect latch with low jitter (fast response)
DRV5013—High voltage (up to 38-V), high bandwidth (30-kHz) Hall effect latch
Digital processing
MCUs with advanced capabilities in secure wired and wireless connectivity, robust touch key solutions, power and standby management and cost effective motor control
Products
Inverting buffers & drivers
SN74AHC1G14—Single 2-V to 5.5-V inverter with Schmitt-Trigger inputs
SN74LVC3G14—3-ch, 1.65-V to 5.5-V inverters with Schmitt-Trigger inputs
CD4049UB—6-ch, 3-V to 18-V inverters
SN74LVC1G14—Single 1.65-V to 5.5-V inverter with Schmitt-Trigger inputs
Fixed-direction voltage translators
SN74LV1T34—Single Power Supply BUFFER Logic Level Shifter (no enable)
AND gates
SN74AHCT1G08—1-ch 2-input 4.5-V to 5.5-V AND gate with TTL-compatible CMOS inputs
Noninverting buffers & drivers
SN74LVC1G07—Single 1.65-V to 5.5-V buffer with open-drain outputs
SN74LVC126A—4-ch, 1.65-V to 3.6-V buffers with 3-state outputs
Direction-controlled voltage translators
TXV0108-Q1—Automotive, dual-supply direction-controlled eight-channel voltage translator
Current & voltage sense
Advanced current sense solutions (isolated & non-isolated) for a wide range of motor control applications.
Products
Series voltage references
REF35—650-nA quiescent current, 12-ppm/°C drift, ultra-low-power precision voltage reference
REF70—Ultra-high-precision voltage reference with low noise and low drift
REF2025—8-ppm/°C drift, low-power, dual-output Vref & Vref/2 voltage reference
REF20-Q1—Automotive low-drift, low-power, series voltage reference
Wired interface
Protected and robust connectivity solutions (isolated & non-isolated) that support common standards such as SPI, I2C, SMBUS, CAN, LIN, RS485, etc. and other proprietary protocols.
Products
Noninverting buffers & drivers
SN74LVC1G07—Single 1.65-V to 5.5-V buffer with open-drain outputs
SN74LVC126A—4-ch, 1.65-V to 3.6-V buffers with 3-state outputs
Direction-controlled voltage translators
TXV0108-Q1—Automotive, dual-supply direction-controlled eight-channel voltage translator
RS-232 transceivers
MAX3232E—3- to 5.5-V dual channel 250kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection
TRS3122E—1.65- to 5.5-V 1Mbps RS-232 line driver/receiver with logic supply pin & +/-15-kV IEC-ESD protection
RS-485 & RS-422 transceivers
SN65HVD3082E—Half-duplex RS-485 transceiver
THVD1500—5-V RS-485 transceiver up to 500 kbps with ±8-kV IEC ESD protection
Signal input/output protection
Signal input/output protection provides protected and reliable communication between the MCU, multiple sensors and battery packs.
Products
ESD protection diodes
ESD351—1.8-pF, 3.3V, ±30-kV ESD protection diode with 6.5-V, 16-A TLP clamping in 0402 package for USB 2.0
TPD2E001—Dual 1.5-pF, 5.5-V, ±8-kV ESD protection diode with 1-nA max leakage & VCC pin for USB 2.0
TPD4E004—Quad 1.6-pF, 5.5-V, ±8-kV ESD protection diode with VCC pin for High Speed Interfaces
TVS diodes
TVS3300—33V flat-clamp surge protection device
TVS0500—5V flat-clamp surge protection device
TVS1400—14V flat-clamp surge protection device
Wireless interface
Robust, power efficient and highly secure solutions and certified modules that enable the rapid and easy addition of Wi-Fi and/or BLE connectivity to the Internet of Things (IoT), enabling extended field studies, asset tracking, configuration and interfacing.
Products
Sub-1 GHz wireless MCUs
CC1312R—SimpleLink™ 32-bit Arm Cortex-M4F Sub-1 GHz wireless MCU with 352kB Flash
Wi-Fi products
CC3200—SimpleLink™ 32-bit Arm Cortex-M4 Wi-Fi® wireless MCU with 2 TLS/SSL and 256kB RAM
Low-power 2.4-GHz products
CC2640—SimpleLink™ 32-bit Arm Cortex-M3 Bluetooth® Low Energy wireless MCU with 128kB Flash
CC2651R3—SimpleLink™ 32-bit Arm® Cortex®-M4 single-protocol 2.4-GHz wireless MCU with 352-kB flash
CC2630—SimpleLink™ 32-bit Arm Cortex-M3 Zigbee and 6LoWPAN wireless MCU with 128kB Flash
CC2650MODA—SimpleLink™ 32-bit Arm Cortex-M3 multiprotocol 2.4 GHz wireless module with 128kB Flash
Other wireless products
CC2620—SimpleLink™ 32-bit Arm Cortex-M3 Zigbee® RF4CE wireless MCU with 128kB Flash
Monitoring
Cost and board space effective solutions to assure proper operation and fault condition detection.
Products
Supervisor & reset ICs
TPS3897—Single-channel, ultra-small, adjustable supervisor with active-high, open-drain output
TPS3895—Single-channel, ultra-small, adjustable supervisor with active-high, push-pull output
TPS3839—Ultra-low power, supply voltage supervisor
Analog temperature sensors
LMT87—±2°C 2.7V to 5.5V analog output temperature sensor with -13.6 mV/°C gain
LMT84—1.5V-Capable, 10 uA Analog Output Temperature Sensor in SC70 and TO-92
LMT86—2.2V-Capable, 10 uA Analog Output Temperature Sensor in SC70 and TO-92
LMT87-Q1—Automotive ±2.7°C 2.7V to 5.5V analog output temperature sensor with -13.6 mV/°C gain
Temperature switches
TMP302-Q1—Automotive, Pin-Selectable Trip Point 1.4V-Capable Family of Temperature Switches
Digital temperature sensors
LMT01—0.5°C Accurate 2-pin Temperature Sensor with a Pulse Train Interface
Output user interface
Appealing, yet cost effective HMI solutions from indication LEDs to high-end touch screens & displays.
Products
RGB LED drivers
LP5018—18-channel I2C constant-current RGB LED driver
LP5813—Synchronous boost 4 x 3 matrix RGB LED driver with I2C and auto animation control
Low-side drivers
UCC27517—4-A/4-A single-channel gate driver with 5-V UVLO and 13-ns prop delay in SOT-23 package
Speaker amps
TAS5822M—35-W, inductor-less, digital input, stereo, closed-loop Class-D amp with 96-kHz enhanced process
TAS5825M—38-W stereo, 65-W mono, 4.5- to 26-V, digital input Class-D Smart Audio Amplifier w/ 192kHz arch
Previous: Electric power steering (EPS)
Next: Cordless power tool