Overview
Description
Related applications
Our integrated circuits and reference designs help you create innovative lawn mowers with lower audible noise and higher efficiency over combustion engines.
Design requirements
Advanced lawn mower designs often require:
Highly-efficient motor control with enhanced protection.
Accurate sensing technologies to meet safety requirements.
Advanced battery management for safety, longevity and durability.
Secure and reliable wireless/mobile connectivity for IoT-based applications.
Power Protection & Gating
Highly integrated and protected, compact solutions provide safety coverage for different low power voltage rails. Power gating solutions for low standby power.
Products
eFuses & hot swap controllers
TPS25921L—4.5-V to 18-V, 90mΩ, 0.4-1.6A eFuse with latch off fault response
TPS2596—2.7-V to 19-V, 85mΩ, 0.13-2A eFuse with selectable over voltage protection clamp in leaded package
Load switches
TPS22918—5.5-V, 2-A, 52-mΩ load switch with adj. rise time and adj. output discharge
Non-Isolated DC/DC Power Supply
Cost effective, high efficiency, small form factor DC/DC solutions with excellent EMI performance.
Products
Linear & low-dropout (LDO) regulators
TLV761—1-A 16-V high-PSRR linear voltage regulator
TLV758P—500-mA, low-IQ, high-accuracy, adjustable ultra-low-dropout voltage regulator with enable
TLV752—1-A, low-IQ, high-PSRR, adjustable, dual-channel low-dropout (LDO) voltage regulator
Buck converters (integrated switch)
LM5168—6-V to 120-V wide VIN, 300-mA DC-DC converter with Fly-Buck™ capability
TPS54560B—4.5-V to 60-V input, 5-A, step-down DC-DC converter with Eco-mode™
LM76005—3.5-V to 60-V, 5-A synchronous step-down voltage converter
Buck controllers (external switch)
LM5146—100-V synchronous buck DC/DC controller with wide duty-cycle range
LM5146-Q1—Automotive 100-V synchronous buck DC/DC controller with wide duty-cycle range
N-channel MOSFETs
CSD19531Q5A—100-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 6.4 mOhm
CSD18512Q5B—40-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 1.6 mO
CSD88537ND—60-V, N channel NexFET™ power MOSFET, dual SO-8, 15 mOhm
CSD17576Q5B—30-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 2.9 mOhm
Multi-channel ICs (PMICs)
LP87524J-Q1—Multiphase 4MHz, 4A/1.0V + 2.5A/1.8V + 1.5A/3.3V + 1.5A/1.2V buck converters for AWR and IWR MMICs
Lighting
Highly reliable solutions optimized for cost, size and pin count drive head lights.
Products
RGB LED drivers
TLC59116—16-bit Fast-Mode Plus (FM+) I2C-Bus constant-current LED sink driver
TLC59283—16 channel constant current LED driver with pre-charge FET
N-channel MOSFETs
CSD19531Q5A—100-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 6.4 mOhm
CSD18512Q5B—40-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 1.6 mOhm
CSD88537ND—60-V, N channel NexFET™ power MOSFET, dual SO-8, 15 mOhm
CSD17576Q5B—30-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 2.9 mOhm
Low-side drivers
UCC27524—5-A/5-A dual-channel gate driver with 5-V UVLO, enable, and 1-ns delay Matching
Power blocks
CSD88584Q5DC—40-V, N channel synchronous buck NexFET™ power MOSFET, SON 5 mm x 6 mm Dual-Cool™ power block, 50 A
CSD88599Q5DC—60-V, N channel synchronous buck NexFET™ power MOSFET, SON 5 mm x 6 mm Dual-Cool™ power block, 40 A
Wireless Interface
Robust, power-efficient and highly secure solutions and certified modules that enable rapid and easy addition of Wi-Fi and/or BLE connectivity to the Internet of Things (IoT).
Products
Low-power 2.4-GHz products
CC2340R5—SimpleLink™ 32-bit Arm® Cortex®-M0+ Bluetooth® Low Energy wireless MCU with 512-kB flash
CC2651R3—SimpleLink™ 32-bit Arm® Cortex®-M4 single-protocol 2.4-GHz wireless MCU with 352-kB flash
CC2640—SimpleLink™ 32-bit Arm Cortex-M3 Bluetooth® Low Energy wireless MCU with 128kB Flash
Wired interface
Protected and robust connectivity solutions (isolated & non-isolated) that support common standards such as SPI, I2C, UART, etc. and other proprietary protocols.
Products
RS-232 transceivers
MAX3232E-Q1—Automotive 3- to 5.5-V 250kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection
MAX3232E—3- to 5.5-V dual channel 250kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection
Signal Input/Output Protection
Cost effective, small form factor robust protection solutions with low input capacitance.
Products
ESD protection diodes
TPD2E001—Dual 1.5-pF, 5.5-V, ±8-kV ESD protection diode with 1-nA max leakage & VCC pin for USB 2.0
TPD4E004—Quad 1.6-pF, 5.5-V, ±8-kV ESD protection diode with VCC pin for High Speed Interfaces
TPD4S009—Quad 0.8-pF, 5.5-V, ±8-kV ESD protection diode with VCC pin for High Speed Interfaces
TPD1E10B06—12-pF, ±5.5V, ±30-kV ESD protection diode in 0402 and SOD-523 package
TVS diodes
TVS1400—14V flat-clamp surge protection device
Output User Interface
Appealing, yet cost effective HMI solutions from indication LEDs to high-end touch screens and displays.
Products
RGB LED drivers
TLC59116—16-bit Fast-Mode Plus (FM+) I2C-Bus constant-current LED sink driver
TLC59283—16 channel constant current LED driver with pre-charge FET
Motor driver
Integrated solutions optimized for cost, size and pin count to drive a wide variety of motors. Fully protected and power efficient for high voltage and low voltage.
Products
Brushed DC (BDC) motor drivers
DRV8251A—50-V, 4.1-A H-bridge motor driver with integrated current regulation & current-sense feedback
DRV8251—50-V, 4.1-A H-bridge motor driver with integrated current regulation & latched OCP
Half-bridge drivers
LM2105—107-V 0.5-A/0.8-A half-bridge gate driver with 5-V UVLO and integrated bootstrap diode
LM5108—2.6-A, 110-V half bridge gate driver with enable and interlock
UCC27211A-Q1—Automotive 4-A, 120-V half bridge gate driver with 8-V UVLO and negative voltage handling
UCC27211A—4-A, 120-V half bridge gate driver with 8-V UVLO and negative voltage handling
Isolated gate drivers
UCC21225A—2.5kVrms, 4A/6A dual-channel isolated gate driver with dual input, 5V UVLO & LGA package
UCC5350—3kVrms, 5A/5A single-channel isolated gate driver with miller clamp or split out & 8V or 12V UVLO
N-channel MOSFETs
CSD19531Q5A—100-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 6.4 mOhm
CSD18512Q5B—40-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 1.6 mOhm
CSD88537ND—60-V, N channel NexFET™ power MOSFET, dual SO-8, 15 mOhm
CSD17576Q5B—30-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 2.9 mOhm
Isolated DC/DC converters & modules
LM34927—7.5-100V Wide Vin, 600mA Integrated Secondary Bias Regulator for Isolated DC/DC Converters
Low-side drivers
UCC27524—5-A/5-A dual-channel gate driver with 5-V UVLO, enable, and 1-ns delay Matching
Power blocks
CSD88599Q5DC—60-V, N channel synchronous buck NexFET™ power MOSFET, SON 5 mm x 6 mm Dual-Cool™ power block, 40 A
CSD88584Q5DC—40-V, N channel synchronous buck NexFET™ power MOSFET, SON 5 mm x 6 mm Dual-Cool™ power block, 50 A
General-purpose op amps
TLV9061—Single, 5.5-V, 10-MHz, RRIO operational amplifier for cost-optimized applications
LMV324A—Quad, 5.5-V, 1-MHz, 4-mV offset voltage, RRO operational amplifier
TLV9002—Dual, 5.5-V, 1-MHz, RRIO operational amplifier for cost-optimized applications
TLV9062-Q1—Automotive, dual 5.5-V 10-MHz operational amplifier
Input user interface
Easy-to-implement touch key, switch and slider solutions with low power consumption - highly robust to moisture and EMI (especially conducted noise).
Products
MSP430 microcontrollers
MSP430FR2111—16 MHz MCU with 4KB FRAM, 1KB SRAM, comparator, 10-bit ADC, UART/SPI, timer
MSP430F5528—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
MSP430F5529—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
MSP430G2553—16 MHz MCU with 16KB Flash, 512B SRAM, comparator, UART/SPI/I2C, timer
I2C general-purpose I/Os (GPIOs)
TCA9535—16-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt & config registers
Digital processing
MCUs with advanced capabilities for high efficiency motor control, power management, secure wired and wireless connectivity, HMIs.
Products
Low-power 2.4-GHz products
CC2340R5—SimpleLink™ 32-bit Arm® Cortex®-M0+ Bluetooth® Low Energy wireless MCU with 512-kB flash
CC2651R3—SimpleLink™ 32-bit Arm® Cortex®-M4 single-protocol 2.4-GHz wireless MCU with 352-kB flash
CC2640—SimpleLink™ 32-bit Arm Cortex-M3 Bluetooth® Low Energy wireless MCU with 128kB Flash
CC2630—SimpleLink™ 32-bit Arm Cortex-M3 Zigbee and 6LoWPAN wireless MCU with 128kB Flash
C2000 real-time microcontrollers
TMS320F28075—C2000™ 32-bit MCU with 120 MHz, FPU, TMU, 512 KB flash, CLA, SDFM
TMS320F280048C-Q1—Automotive C2000™ 32-bit MCU w/ 100 MHz, FPU, TMU, 256 KB flash, CLA, InstaSPIN-FOC, CLB, PGAs, SDFM
TMS320F28027F—C2000™ 32-bit MCU with 60 MHz, 64 KB flash, InstaSPIN-FOC
MSP430 microcontrollers
MSP430FR2111—16 MHz MCU with 4KB FRAM, 1KB SRAM, comparator, 10-bit ADC, UART/SPI, timer
MSP430F5529—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
MSP430F5528—25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
AND gates
SN74HCS08—4-ch, 2-input 2-V to 6-V high-speed (12 ns) AND gate with Schmitt trigger inputs
SN74LVC1G08—1-ch, 2-input 1.65-V to 5.5-V 32 mA drive strength AND gate
SN74LVC08A-Q1—Automotive, 4-ch 2-input 2-V to 3.6-V AND gate
Current & voltage sense
Advanced current sense solutions (isolated & non-isolated) for a wide range of motor control applications and power supervision.
Products
Isolated amplifiers
AMC1211-Q1—2-V input, precision voltage sensing basic isolated amplifier
Series voltage references
REF4132—12-ppm/°C low-noise low-power precision voltage reference
REF70—Ultra-high-precision voltage reference with low noise and low drift
REF2025—8-ppm/°C drift, low-power, dual-output Vref & Vref/2 voltage reference
REF20-Q1—Automotive low-drift, low-power, series voltage reference
Shunt voltage references
TL431—Adjustable precision shunt regulator
LM4040-N—100-ppm/°C precision micropower shunt voltage reference
LM4041A12—1.2-V precision micropower shunt voltage reference with 0.1% accuracy
Sensors
Innovative solutions for a wide range of sensor types applicable to lawn mowers. Optimized for cost, performance and reliability.
Products
Temperature switches
TMP302—Pin-Selectable Trip Point 1.4V-Capable Family of Temperature Switches
Analog temperature sensors
LMT84—1.5V-Capable, 10 uA Analog Output Temperature Sensor in SC70 and TO-92
LMT87—±2°C 2.7V to 5.5V analog output temperature sensor with -13.6 mV/°C gain
LMT87-Q1—Automotive ±2.7°C 2.7V to 5.5V analog output temperature sensor with -13.6 mV/°C gain
TMP235—1C analog temperature sensor, 10 mV/C
Linear Hall-effect sensors
DRV5053—High voltage (up to 38V), linear hall effect sensor
Hall-effect latches & switches
DRV5013—High voltage (up to 38-V), high bandwidth (30-kHz) Hall effect latch
Light sensors
OPT3001—Digital ambient light sensor (ALS) with high-precision human-eye response
Digital temperature sensors
LMT01—0.5°C Accurate 2-pin Temperature Sensor with a Pulse Train Interface
Analog front end
Signal conditioning solutions for a wide range of sensor types applicable to lawn mowers. Analog and digital output options available (cost effective or high end).
Products
Precision ADCs
ADS1013—12-Bit 3.3kSPS 1-Ch Delta-Sigma ADC With Oscillator, Voltage Reference, and I2C
ADS8320—16-Bit, High-Speed, 2.7V-to-5V Micropower Sampling Analog-to-Digital Converter (ADC)
ADS124S08—24-bit, 4-kSPS, 12-ch delta-sigma ADC with PGA and voltage reference for sensor measurement
Digital potentiometers (digipots)
TPL0102-100—256-tap dual-channel digital potentiometer with I2C interface and nonvolatile memory
Series voltage references
REF4132—12-ppm/°C low-noise low-power precision voltage reference
REF70—Ultra-high-precision voltage reference with low noise and low drift
REF2025—8-ppm/°C drift, low-power, dual-output Vref & Vref/2 voltage reference
REF20-Q1—Automotive low-drift, low-power, series voltage reference
REF1930—3-V Vref, dual-output Vref & Vref/2 voltage reference
REF1925—2.5-V Vref, dual-output Vref & Vref/2 voltage reference
Analog switches & muxes
SN74LV4052A—5-V, 4:1, 2-channel analog multiplexer
TS5A3159A—1-Ω, 5-V, 2:1 (SPDT), 1-channel general-purpose analog switch with powered-off protection
TS5A21366—0.75-Ω on-state resistance, 5-V, 1:1 (SPST), two-channel analog switch with 1.8-V input logic
Monitoring
Cost optimized and compact solutions assure proper operation and/or reliably detect any fault conditions.
Products
Supervisor & reset ICs
TPS3809-Q1—Automotive, 3-pin voltage supervisor (reset IC) with active-low, push-pull reset
TPS3839—Ultra-low power, supply voltage supervisor
Analog temperature sensors
LMT84—1.5V-Capable, 10 uA Analog Output Temperature Sensor in SC70 and TO-92
LMT87—±2°C 2.7V to 5.5V analog output temperature sensor with -13.6 mV/°C gain
LMT87-Q1—Automotive ±2.7°C 2.7V to 5.5V analog output temperature sensor with -13.6 mV/°C gain
TMP235—1C analog temperature sensor, 10 mV/C
Digital temperature sensors
LMT01—0.5°C Accurate 2-pin Temperature Sensor with a Pulse Train Interface
Position sensor
Low cost, integrated and protected Hall and inductive sensor ICs enable the detection of position, speed or acceleration by sensing a magnetic field or conductive target.
Products
Hall-effect latches & switches
DRV5013—High voltage (up to 38-V), high bandwidth (30-kHz) Hall effect latch
Previous: Electric power steering (EPS)
Next: Mains powered tools